Customer Reviews

4.88 out of 5
Write a Review
  • All Reviews (1072)
  • Image (99)
  • Video (0)
  • All Star
    • All Star(1072)
    • 5 Star(981)
    • 4 Star(64)
    • 3 Star(16)
    • 2 Star(8)
    • 1 Star(3)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
  • Nudl
    2020-04-27 15:06:51

    Delivery without problems as expected. But it seems they are from different makers. Two of them (which are identical, brighter green sleight ) working fine after little extra lubrication, one (which are little bit smaller width, darker green sleight) is sticking always on the same position. Tried to move the sleights which show the difference between. the sleight of the good one has a tiny gap on the track of the bad one. The two good ones had a stop plug on both ends, the bad one just cable ties.

  • erecxx
    2020-02-15 12:13:08

    Ok product but the packaging was not good enough, the rails came in a plastic bag without any bubble wrap or cardboard to protect the rails and blocks. All of the rails were bent and the blocks had seized on the rail plastic stop, which damaged the red rubber seal.

    Comments (1)
  • 2020-03-05 08:40:53

    Fast delivery, superb quality, great price. Banggood. As usual. Real pleasure to do shopping with BG. The package was well secured. Rails will be used for upgrading my 3d printer.

  • vo1m1r
    2020-07-19 09:30:26

    Купил 3шт. 350 mgn12h, люфтов нет, доставка 1неделя и 1 день с момента покупки, это что то невероятное, Всем рекомендую!

  • Jk1920
    2020-01-29 06:02:27

    I bought two of them. The first one i used it after I disassembled and cleaned it. So far it seems to be working well. The second one i also disassembled to clean it beforei used it. The linear rail guide has marks from bearings (you can see in the pics). I reasembly it and lubricate it . The movement is not so smooth and when you move the block you can " fill" in some places the grooves.

  • Yamie
    2020-02-06 17:58:52

    I am no expert on linear rails, but after cleaning off the old oil with isopropyl and regreasing with ptfe lube those run very smooth and silent I used two in parallel to upgrade my ender 3 y axis

    Comments (1)
  • Kenno
    2020-03-04 21:10:47

    This is a quality linear motion part. The rail is sturdy and capable of unsupported extension (tested at c.0.5 m when held with two sliding supports in tandem. (A drawbot, H-Bot, Axidraw type project, for >A3 size reach. Be very careful not to expose the bearings as they are supported internally by a very thin wire.

  • 2020-09-29 21:26:04

    Good quality for the price. One warning though, Machfit slides usually come with ball bearings missing to make it slide easier. (see photo) This is not a problem for light duty applications, but is less than ideal for larger loads. The one I got from another vendor did not have this issue. Also, the bar part is slightly curved. It is intended to be fastened down to a straight surface.

  • nexuwa
    2020-09-08 04:29:42

    Producto recibido en perfectas condiciones y tal como lo describe la ficha del producto. Envío muy rápido, recibido antes de lo esperado. Vienen con unos topes para que no se salga el patín en el transporte. Muy satisfecho y recomiendo vendedor.

  • NetSter
    2020-06-24 08:25:27

    different lengths


    Go to page


    You might be interested in

    recommendation for you
    • US$39.99
    • US$14.99
    • US$25.19
    • US$5.99
    • US$37.05
    • US$8.99
    • US$41.59
    • US$18.19
    • US$24.99
    • US$19.99
    • US$26.24
    • US$26.61
    • US$10.99
    • US$14.41
    • US$13.99
    • US$36.76
    • US$17.84
    • US$54.87