When off: fast 5 click toenter; button is on (memory brightness), loose key off; power off to exit this mode;
In the off state, fast 6 click
Accessibility:
1. Battery voltage viewing mode:
1) In the off state: 3 hit into the battery voltage view mode: for example, flash 3 times first, then flash 7 times after 1 second, the current voltage is 3.7V; repeat flash after 2 seconds, click to exit the battery voltage view mode;
2) Double click to enter the Good Night mode:
2. Good night mode:
1) Click Shutdown;
2) Double click to enter the signal mode;
3. Signal mode:
1) Click Shutdown;
2) Double click to enter the temperature viewing mode;
3) 4 hits the interval setting of each flash of the signal light; press n in the low-light strobe to flash the signal light for n seconds;
4. Temperature viewing and setting mode:
1) Temperature viewing mode: for example, 3 flashes first, then 7 flashes after 1 second, the current voltage is 37 °C;
2) Click Shutdown;
3) Double click to enter the battery voltage view mode;
4) 4 hits into the temperature design mode:
Pressing n in the first low-light strobe is to check the current temperature. (It is recommended to set it under the flashlight cooling); for example, the room temperature is 22 °C, click 22 times;
Pressing n in the second low-light strobe is the maximum temperature limit. For example, if you want to limit the maximum temperature of the flashlight to 50 °C, then n is 50-30=20 times; (the maximum temperature limit should be greater than 30 °C)
Blinking mode (The following 4 modes are with memory, click under shutdown, click and then press to enter the memory mode (but candlelight mode default))
1. Candle mode:
1) Click Shutdown;
2) Double click to enter the bicycle flash mode;
3) Three-stroke extended candlelight mode for 30min; (time to shut down, there is no time limit by default, so you need to set the time yourself)
4) Long press the brightness to increase the dimming; click to lengthen the dimming according to the brightness;
2. Bicycle flash mode:
1) Click Shutdown;
2) Double click to enter the party/tactical flash mode;
3) Long press the brightness to increase the dimming; click to lengthen the dimming according to the brightness;
3. Party/tactical flash mode
1) Click Shutdown;
2) Double click to enter lightning mode;
3) Long press the flashing frequency to speed up; click to lengthen the flashing frequency to decrease;
4. Lightning mode:
1) Click Shutdown;
2) Double click to enter the candle mode;
Indicator light:
The indicator light is green
The power-on status indicator is on: it is dim when the main light is low, and bright when the main light is high;
In the power-off state, click the switch button status 7 times quickly: Off and bright flashes.
United Kingdom , USD
Scan the QR Code to save more.
