Všechny zprávy

Roger Hi, the JX-1301 seems to be the same as the Irwin, except that it is less expensive. I'm using it for more than 1,5 year, and are still very happy I bought it. It's a good quality tool.

2020-10-20 11:00:18 Ochotný (0)
Předložit
odpovědi (2)

Q: What is the function of pushbutton S1?

zeptal se spaco na 2019-08-30 04:16:07

Roger The pushbutton is the main ON / OFF switch. It cuts the input (jack plug) from the 3 outputs.

2019-08-31 02:08:15 Ochotný (0)
Předložit
odpovědi (1)

Q: Do you also have Cool White?

zeptal se kam1787 na 2019-08-28 08:54:22

Roger https://www.banggood.com/High-Power-3W-LED-DIY-Light-Bead-Lamp-Chip-Blue-Red-Green-Warm-White-Yellow-p-1024180.html?rmmds=search

2019-08-30 01:56:28 Ochotný (0)
Předložit
odpovědi (2)

Roger Youmay use to receivers of 4 channels with only one remote (if you paire them), but on each receiver the first channel will be ON when you push button 1 of the remote, and so on. It has not much sense.

2019-08-15 02:57:58 Ochotný (0)
Předložit
odpovědi (1)

Q: Vt means what

zeptal se kalaiselvanmani na 2019-08-14 01:32:53

Roger TheVT pin is the validation pin, to make sure the received signal is coming from the paired remote. You can just wire it to high.

2019-08-15 02:55:50 Ochotný (0)
Předložit
odpovědi (1)

Q: The Whiter From the rgb is neutral/normal one?

zeptal se gabriel_wender na 2019-08-13 10:49:18

Roger Youhave the choice between RGB, or Warm white, or neutral white (less yellowish than the warm white). This are 3 different strips.

2019-08-15 02:52:28 Ochotný (0)
Předložit
odpovědi (1)

Roger That'snot normal. 3 possibilities : First, your module is effective. Second, you need to pair the remotes from new. Third, a neighbour is using something with same frequency (may baby survey tool)

2019-08-05 05:08:14 Ochotný (0)
Předložit
odpovědi (2)

Q: Is it suitablefor windows7?

zeptal se om meena na 2019-07-15 11:27:11

Roger Theoperating system doesn't influence.

2019-07-24 04:43:27 Ochotný (0)
Předložit
odpovědi (1)

Roger onceyou don't use it in the way the manufacturer build it, it's at your own risks. You have to see how the segments are powered.

2019-07-24 04:42:29 Ochotný (0)
Předložit
odpovědi (2)

Q: Will it work with 9v?

zeptal se omerss na 2019-07-23 12:21:03

Roger Yes,but it will not be bright enough, because the small resistors are calculated for 12V

2019-07-24 04:39:49 Ochotný (0)
Předložit
odpovědi (1)
Roger 2019-08-21 05:44:01
0
Doporučení
Komentáře (0)

Nejlepší recenzenty, které se vám mohou líbit:

Roger 2019-06-15 11:46:17
0
Doporučení
Komentáře (0)

Nejlepší recenzenty, které se vám mohou líbit: