kunde anmeldelser

4.79 ud af5
Skrive en anmeldelse
  • Alle anmeldelser(19)
  • Billede(5)
  • Video(0)
  • All Star
    • All Star(19)
    • 5 stjerne(15)
    • 4 stjerne(4)
    • 3 stjerne(0)
    • 2 stjerne(0)
    • 1 stjerne(0)
Sorter efter:
Top anmeldelse
  • Top anmeldelse
  • Mest nyttige
  • Seneste
Anmeldelser kun fra dit land (United States)
  • June-24 2020 17:10:40

    Was great for few test welds and then began to sparks fly from PCB, one small transistor melted and few mosfets went hot and bit smoke. I read one review where was similar case like i have, not sure did we just get bad monday items or what. Small minus, does not contain any instructions, for example what led colors means would be great.

    Kommentarer (1)
  • October-06 2020 16:46:06

    it works well, using 4S lipo battery. when using first and second level of power, device and battery do not get too much hot, so you could make many spot weldings.

  • December-01 2020 09:41:12

    The spot welder works like a charm. Before using, make sure to solder the capacitor to the input of the device. I spot welded a 1.5 mm thick nickel strip with the LVL 3 power (Blue colour). For the best result use a big 4s lipo Battery. I used a 5000 mAh 60C lipo. You need at lease 150A discharge current for the device to work properly (You can calculate the max discharge current by multiplying the capacity with the C rating. For example, if the Lipo has 2000mAh and 100C the calculation should look

  • August-06 2020 20:40:38

    This board is very nice, and works quite well. So far very happy with this board. The mounting holes are very small. The positive is a 2mm hole, and the negative is 3mm. I made a brass extender for the positive on my Mini Lathe. Used a 3mm brass riser and turned down the 3mm screw end to 2mm to fit the hole on the board. I then soldered this to the board, so I had a 3mm location to mount the positive connection. I had some welding tips from another board that failed, So I used those. Had to use

  • August-01 2020 21:20:12

    Seems to do what I need done using the Red and Green settings. Purple BLOWS holes in 18650 cells. LOL Bet folks would be willing to pay a extra dollar for documented instructions ? I located the Cap on the underside.

  • June-12 2020 15:01:57

    not to happy with item no one knows where to solder capacitor! finaley figured it out , worked great firs time then burned out 2 x fets on second try!

  • September-18 2020 07:54:45

    thank you

  • June-20 2020 09:27:52

    Works good. Included Instructions would be great.

  • January-12 2021 06:28:35

    acquistato solo il cavo

  • October-31 2020 11:34:07

    the spot welder should come with the needle


    Total 0 pages

    Go to page


    Du er måske interesseret i

    recommendation for you
    • US$17.99
    • US$3.99
    • US$7.77
    • US$5.99
    • US$52.99
    • US$24.99
    • US$3.99
    • US$4.19
    • US$6.99
    • US$5.99
    • US$1.99
    • US$3.14
    • US$2.99
    • US$1.99
    • US$9.99
    • US$1.99
    • US$2.09
    • US$6.99