Tous les messages

georget Here is a link to a manual that is very close to this GM328A tester... https://img.banggood.com/file/products/20170621041627Transistor%20Tester-user-manual.pdf You will need to connect an external IR Infrared Receiver to the tester to receive codes. Something like this... https://usa.banggood.com/10pcs-Universal-IR-Infrared-Receiver-Head-With-Iron-Shell-TL1838-VS1838B-1838-38Khz-p-1211280.html?rmmds=buy&cur_warehouse=CN

2020-11-21 08:15:13 Utile (1)
Soumettre
réponses (2)

Q: is keyboard.h library available in this version?

demandé par Saurav Modak sur 2018-11-15 06:35:24

georget I do not see any info for keyboard.h library compiling on the D1 R2.

2020-11-20 07:32:46 Utile (0)
Soumettre
réponses (2)

Q: ele vem desmontado?

demandé par Danilo Bellato Beissman sur 2019-05-11 12:48:26

georget It is a kit where you have to solder the electronic components on the board and assemble the case.

2020-11-20 06:55:30 Utile (0)
Soumettre
réponses (4)

georget No this is NOT an intelligent controller. It is simply an amplifier. You connect the output of your LED controller such as an Arduino, to the input of this amplifier. Then connect the output of this amplifier to a string of RGB or RGBW leds to drive them.

2020-11-20 06:51:01 Utile (0)
Soumettre
réponses (1)

Q: What version firmware does the tester ship with? Is it V2.68?

demandé par georget sur 2020-02-29 12:01:55

Eugen NO, mine was LCR transistor tester by efan & haoqixin v2.07, one year old now.

2020-03-01 01:45:59 Utile (1)
Soumettre
réponses (3)

georget I would use the holder that comes with the Ksger soldering station. This way you can position it where ever it is most comfortable to reach. I just use the Daniu for holding the component and the magnifier to get a better view. You may still need glasses depending on how bad your eyes are.

2020-11-12 07:07:37 Utile (0)
Soumettre
réponses (1)

georget Absolutely NOT 5mm. That must be a typo on the website. Always go by what the manufacture printed on the tool. 1 mm copper max. This is a precision tool for cutting component leads flush with the circuit board. Great tool for what it does.

2020-11-12 06:56:50 Utile (0)
Soumettre
réponses (6)

Q: is this good also for making cutting holes in masonry walls?

demandé par Cesar Cruz sur 2019-11-25 11:10:05

georget These blades are great for wood and maybe drywall, but not cement.

2020-11-12 06:46:23 Utile (0)
Soumettre
réponses (2)

Q: when will stock came??available thanks

demandé par BG141016411 sur 2020-11-10 06:40:55

georget It looks like it is in stock now as of 11-10-2020

2020-11-10 06:48:05 Utile (0)
Soumettre
réponses (1)

georget After the battery has gone through the Pulse Repair mode and displays OFF, you should switch it over to Vehicle or Motorcycle mode if you are going to keep the charger on the battery for an extended period of time. The charger will act as a trickle charger to maintain the battery. Normally you will use the charger in Vehicle or Motorcycle mode to charge your battery. I usually use Motorcycle mode because it charges at a lower Amp. I only put the charger on my batteries in Pulse repair mode once a month.

2020-11-10 05:36:20 Utile (1)
Soumettre
réponses (2)

georget Power Select 1 is the option to use if your power supply output is two wires. Power Select 2 is the option to use if your power supply has a plug or jack connected. Both options are connected in parallel on the circuit board. It is there for your convenience.

2020-11-04 09:55:44 Utile (0)
Soumettre
réponses (2)

georget Yes, The charger should be able to charge EFB (Enhanced Flooded Battery) and AGM (absorbent glass mat) batteries. It is best to charge a battery slow using the Motorcycle mode of the charger. Current is limited to 1.5 amps. It may take several hours to charge depending on the state of discharge of your battery.

2020-11-04 08:52:16 Utile (0)
Soumettre
réponses (3)

Q: How can I contact the seller?

demandé par MikeDAWolf sur 2019-04-24 07:45:51

georget At the top of the page, click Help.

2020-11-04 08:42:21 Utile (0)
Soumettre
réponses (2)

Q: does it work with usb? or what plug does it use?

demandé par Pulsh sur 2017-12-11 10:28:02

georget No, USB does not supply enough power. The LED strip requires 12v and around 6 Amp. Get a power supply something like this... https://www.banggood.com/AC-100-240V-to-DC-12V-5A-60W-Power-Supply-Adapter-For-LED-Strip-Light-p-994870.html

2020-10-27 11:14:48 Utile (0)
Soumettre
réponses (5)

Q: which specific power supply I need to buy? measures

demandé par BG131612938 sur 2020-10-25 10:07:46

georget This one is 5A which is a little low but should be ok. It has the correct size connector 5.5mm x 2.1mm https://www.banggood.com/AC-100-240V-to-DC-12V-5A-60W-Power-Supply-Adapter-For-LED-Strip-Light-p-994870.html

2020-10-27 11:12:48 Utile (0)
Soumettre
réponses (1)

Q: does it works with an 5.5mmX2.1mm power supply with 12V and 2A?

demandé par BG131612938 sur 2020-10-25 11:06:29

georget 2A is too low. You should power the strip with at least 6A. When the strip displays white, it will draw the most power.

2020-10-27 10:57:09 Utile (0)
Soumettre
réponses (1)

Q: Is the built-in charger for NiMH or Li-ion battery?

demandé par Skagg sur 2019-12-15 02:58:03

georget The flashlight ships with a Li-ion Battery so I would suspect the built in charger is for Li-ion.

2020-10-20 06:50:24 Utile (0)
Soumettre
réponses (2)

Q: pengiriman ke indonesia berapa hari? terima kasih

demandé par Usupsaepuloh sur 2019-11-09 02:31:06

georget Iniadalah pertanyaan untuk layanan pelanggan Banggood. Di bagian atas halaman, klik Bantuan - Hubungi Kami - Pra-Penjualan.

2020-10-20 06:42:02 Utile (0)
Soumettre
réponses (2)