All Messages

Q: Can I use a 6s Ni-Mh of 7.2v?

Asked by plazaolajurgi on 2020-02-29 02:18:29

JayBee Yes....

2020-05-31 07:10:21 Helpful (0)
Submit
Answers (2)

ArjanStam Assuming it operates at 300 A for 1.5 sec per weld, one weld will use 300 Amp * 1.5 sec = 450 As. The battery's capacity is specified as 4300 mAh = 4.3 Ah. 4.3 Ah = 4.3 * 3600 As = 15,480 As. The amount of welds per charge is the available amount of Ampère seconds divided by the amount of Ampère seconds per weld, so that's 15,480 As divided by 450 As = 34.4. So a fully charged battery can theoretically supply the required power for 34 of such welds, after which the battery has 0.4 * 450 As = 180 As (50 mAh) capacity left, and has to be recharged.

2020-05-27 03:30:03 Helpful (2)
Submit
Answers (1)

Q: What is accuracy lavel in mm

Asked by BG284481557 on 2020-01-28 09:10:35

JayBee the working area is 180x100x35mm.. Look at pictures.

2020-05-23 08:09:26 Helpful (0)
Submit
Answers (2)

Q: How many welds per charge ??

Asked by JayBee on 2020-05-14 07:50:18

Tinks it says in the description thousands when fully charged.

2020-05-18 05:43:54 Helpful (1)
Submit
Answers (1)
JayBee 2019-03-18 06:44:04
1
Recommendations
Comments (0)

Top reviewers you may like:

JayBee 2020-03-19 06:05:39
1
Recommendations
Comments (0)

Top reviewers you may like:

Q: What are the pinouts. Can't read the PDFs.

Asked by JayBee on 2020-03-23 09:42:57

Bizzmo_ TFmini use GH1.25-4p cable, this pinout is 1: TX 2:RX 3:+5V 4:GND

2020-03-23 09:17:38 Helpful (2)
Submit
Answers (1)
JayBee 2020-03-19 06:07:48
0
Recommendations
Comments (0)

Top reviewers you may like: