All Messages

Scandinavia You can purchase it (Hall version) everywhere else, from around 115USD to the official price at 129USD, not sure what Banggood has going now that they even raised the price even higher than the claimed MSRP 129 price from Jumper and Banggood now wants in preorder 140USD plus shipping plus extra cost for tax insuranceMy guess is that Banggood likely thinks the last western fool ain't born yet, so let's take them for all that we can and with so-called delivery months down the line..But according to Jumper its 129 USD official price on this unit and it will likely get lower when its getting stocked.If you in US then get it from US like RDQ many has it at 129USD before any cashback, coupon etc and all that jazz that will often get the price lower.. and don't use Banggood, better price and you will actually get a warranty and some customer support, that is a joke a Banggood..Purchase it in your home region if your at any extent are able to it and go around Banggood.You will be grateful in the long run.Aaron Chen's Xin Zou Banggood has taken a massive fall this last year, just as Globalgrow (GB) who is disliked as you cant imagine for dishonest morals and straight out lies..

2020-06-13 07:50:48 Helpful (15)
Submit
Answers (4)

Q: is it compatible with the sh72 welder?

Asked by varefaz on 2020-10-29 02:13:13

Jakob One moment I will check as Banggood has contacted me... likely because they can see I got both... I reckon the SH72 welder you refer to the soldering iron.?answer, No it doesn't fit.. the SH72 seems to have a 55x25 DC barrel while this looks to be a 55x2.1mm DC barrel jack.but a cheap 1USD 55x25 to 55x21 DC to DC adapter will work.

2020-10-29 06:35:16 Helpful (1)
Submit
Answers (1)

Q: Please confirm that device measures both in meters, and YARDS

Asked by BG208511413 on 2020-08-06 10:01:32

Jakob Yes both Yards and Meters, you cycle with holding down both mode and action button at the same time for around 1 second. This IR sensor seems optimised for white and got it to perform 1550m and around 1670 yards you also have an datalog with 10 entries i have posted a video showing all of this with a camera showing insidethe optic' while under use..

2020-09-13 10:08:14 Helpful (2)
Submit
Answers (2)

Q: is it good for golf

Asked by BG112547104 on 2020-08-14 04:29:01

Jakob it got a 20degree slope compensation and a flagpole lock mode.. build and lensquality are nothing to write home about, but then again, it matches the price.

2020-09-09 01:17:54 Helpful (1)
Submit
Answers (3)

Jakob most rangefinders does this and its quite crude, it pulses som IR laser beams at fx car you focusing on and it measures the interval for the beams to arrive and then it can caluclate the speed. and yes it is facinsting, how such a small sensor can measure back-comming IR beams at these distances.

2020-09-07 11:31:53 Helpful (1)
Submit
Answers (2)

Jakob No you have full control on the output power with the board. you have like 1 to 10 steps. and in step 1 you have 0 (off) to 100 with an interval of 1, and that is only step 1 from step 2 to 10 (10 full power) you have steps of 10% for each step, so 9 steps from 2 to 10.(10= full power). only at step 1 you have 100 intervals. but the board have a seperate 2pin TTL interface, so you can override the board and just TTL control it from other parts (TTL 0-20khz, 3,3v to 12v). the switch on the board has 3 states, "On" (board control output like above) "On" (TTL input control is) and "off" (OFF). still early testing for me, but my early testing shows a tad over 4watt. optical real-power on the few testings i have made on my 2 laser power meters. but i do take my readings at +1feet distance and with colimating alignement-lens to fill my LPM sensor head..

2020-07-20 12:52:43 Helpful (4)
Submit
Answers (1)

Jakob Likely mo brown, likely just picture that flukes the pink-color

2020-07-18 09:15:45 Helpful (0)
Submit
Answers (3)

Q: weird high pricing

Asked by Jakob on 2020-06-13 04:25:35

Laurence Hi, maybe you can contact with the Banggood customer service team. https://www.banggood.com/Contact-Us_hi111

2020-07-02 12:47:05 Helpful (0)
Submit
Answers (1)

Jakob [¤¤ BE CAREFULL GUYS, MASSIVE SoC DOWNGRADE ¤¤] was thinking about purchasing this item even though it was even more expensive than the afterall relative old standard M055FCN which are from summer 2019 and often been sold from Banggood to around 500USD not least at 28-12 2019 where it cost 495USD with shipping, but then I notice, something was missing on the new global-version, where are the USB3 port, from the normal old model and who was highlighted as a feature for content with high bitrate or thirdparty items where you can use multiple, and still have fast speed, and after digging about AmLogic-SoC.. This so-called global model, dont have the UHD-TVgrade SoC T968 with Mali830GPU like the normal one had from summer2019 that supported and also had USB3-port on the back, and with a GPU that could handle OpenGL3.1.. this Global only has a low-mid-range SoC T962 28NM which have Mali450 GPU (a GPU from 2012 to 2015) and only stated to support OpenGL2.0 and slow USBsockets, like USB2.0 and dont support high speed 3.0. what a sad downgrade for 1 year old product, while even raising the price...tjahh China in a nutshell, they make a new varaint for the western-market, from a 1 year old product, they even downgrade the internal SoC to a less modern one with ancient specs, and remove the USB3 and then want a higher price. (wthjQuery111309546426135438798_1591442237805).. be careful guys, as one thing you don't want' in Androids operating system OS, is a slow old SoC..

2020-06-06 06:17:18 Helpful (5)
Submit
Answers (2)

Q: [¤¤ BE CAREFULL GUYS, MASSIVE SoC DOWNGRADE ¤¤] was thinking about purchasing this item, and it was even more expensive than the normal and afterall relative old M055FCN which are from summer 2019 and often been sold from Banggood to around 500USD not least at 28-12 2019 where it cost 495USD with shipping, but then i notice, something was missing on the new global version, - were are the USB3 port, I saw on the normal old model and was highlighted as a feature for content with high bitrate or thirdparty items where you can use multiple and still have fast speed, and after digging about AmLogic SoC.. This so-called global model, dont have the UHD-TVgrade SoC T968 with Mali830GPU like the normal one had from summer2019 that supported and also had USB3 port on the back, and with a GPU that could handle OpenGL3.1.. this one only have a low-mid-range SoC T962 28NM which only have Mali450 GPU (a GPU from 2012 to 2015) and only stated to support OpenGL2.0 and also slow old sockets, like USB2.0 and dont support high speed 3.0.. what a sad downgrade for a 1 year old product, while even raising the price...tjahh China in a nutshell, they make a new "model" for western people, from a 1 year old product, they even downgrade the internal SoC CPU & GPU to a less modern one with ancient specs, and remove the USB3 and then want a higher price. (wth??).. be careful guys, one thing you don't want' in Androids operating system OS, is a slow old SoC..- funny, one would think they would have elevated its spec, as it is 1 year old and things in the SoC world get newer and stronger and also cheaper for the same parts, but not China when it comes to the western market and Aaron Chen and Xin Zou's Banggood are certainly not known from being an honest company thats a lesson i have realized to the moon and back after been dealing with their almost offensive support, that are simply speculating in waising your time and sending you around from one to the next, with no purpose what so ever

Asked by Jakob on 2020-06-05 08:20:53
Submit
Answers (0)

Jakob yep, yep, yep, yep, if you want the military protocols it also can perform, as fx if you have an F18, Super Hornet your working on in your backyard, then you need to pay for that bus-option like 1553B 429, which I recall was even more then the full price for the scope. I will put up a texted review in the coming weeks on what you can expect from a base entry purchase with battery and features that you would not expect for a scope in this priceballpark.... I was also hesitate on what kind of handicapped product, I would recive hence options, but was pleasantly surpprised... any specific questions, ask away.

2020-06-01 11:39:19 Helpful (1)
Submit
Answers (2)

Jakob LIkely not as the tempmonitoring is build into the driver that is stacked behind the sink-labbyhousing. If you refer to just the display with the clickswitches, that unit seems to be primarily for the stand-alone laser without CNC rig, as the full package NEJE Master 2 (2020) doesnt seem to include that display The full CNC master 2 rig, have an nominal marketprice of 190 (US) atm. and it goes without saying that, think twice before purchasing such things from Banggood, where accuracy is a significant factor, as you are very far from home, when it comes to moral and how buyer-support is handled.

2020-05-24 05:56:43 Helpful (8)
Submit
Answers (1)