All Messages

Q: What is the function of pushbutton S1?

Asked by spaco on 2019-08-30 04:16:07

Roger The pushbutton is the main ON / OFF switch. It cuts the input (jack plug) from the 3 outputs.

2019-08-31 02:08:15 Helpful (0)
Submit
Answers (1)

Q: Do you also have Cool White?

Asked by kam1787 on 2019-08-28 08:54:22

Roger https://www.banggood.com/High-Power-3W-LED-DIY-Light-Bead-Lamp-Chip-Blue-Red-Green-Warm-White-Yellow-p-1024180.html?rmmds=search

2019-08-30 01:56:28 Helpful (0)
Submit
Answers (2)

Roger Youmay use to receivers of 4 channels with only one remote (if you paire them), but on each receiver the first channel will be ON when you push button 1 of the remote, and so on. It has not much sense.

2019-08-15 02:57:58 Helpful (0)
Submit
Answers (1)

Q: Vt means what

Asked by kalaiselvanmani on 2019-08-14 01:32:53

Roger TheVT pin is the validation pin, to make sure the received signal is coming from the paired remote. You can just wire it to high.

2019-08-15 02:55:50 Helpful (0)
Submit
Answers (1)

Q: The Whiter From the rgb is neutral/normal one?

Asked by gabriel_wender on 2019-08-13 10:49:18

Roger Youhave the choice between RGB, or Warm white, or neutral white (less yellowish than the warm white). This are 3 different strips.

2019-08-15 02:52:28 Helpful (0)
Submit
Answers (1)

Roger That'snot normal. 3 possibilities : First, your module is effective. Second, you need to pair the remotes from new. Third, a neighbour is using something with same frequency (may baby survey tool)

2019-08-05 05:08:14 Helpful (0)
Submit
Answers (1)

Q: Is it suitablefor windows7?

Asked by om meena on 2019-07-15 11:27:11

Roger Theoperating system doesn't influence.

2019-07-24 04:43:27 Helpful (0)
Submit
Answers (1)

Roger onceyou don't use it in the way the manufacturer build it, it's at your own risks. You have to see how the segments are powered.

2019-07-24 04:42:29 Helpful (0)
Submit
Answers (2)

Q: Will it work with 9v?

Asked by omerss on 2019-07-23 12:21:03

Roger Yes,but it will not be bright enough, because the small resistors are calculated for 12V

2019-07-24 04:39:49 Helpful (0)
Submit
Answers (1)