All Messages

ridgeracer At the very least it will work in PPM mode

2020-10-21 05:05:12 Helpful (0)
Submit
Answers (3)

ridgeracer The description of this esc is all wrong. this is not a Blheli_32 esc. In the pics you clearly see 4 BB21 chips and not the STMF0 32 bit processor as described.

2020-09-16 11:35:50 Helpful (0)
Submit
Answers (3)

ridgeracer You need to set it to Delta for elevon mix.

2020-09-13 12:29:02 Helpful (0)
Submit
Answers (5)

ridgeracer I agree. Also find a spot that is away from excess vibration and use thick enough double sided tape.

2020-06-04 11:51:36 Helpful (1)
Submit
Answers (2)

Q: Who makes this fpv plane?

Asked by ridgeracer on 2020-03-29 08:32:30

konraddi What brand does it make?

2020-04-27 04:50:04 Helpful (2)
Submit
Answers (2)

Q: How do I switch between S-BUS and i-BUS?

Asked by Zin_007 on 2020-03-15 09:41:25

ridgeracer Short answer...you can't. Only outputs Sbus. and PPM.

2020-03-16 10:53:49 Helpful (2)
Submit
Answers (3)

Q: whats the update button?

Asked by zebla883 on 2020-01-03 10:00:23

ridgeracer Not needed. Most FlySky radios will detect older fw and ask to auto update.

2020-03-07 01:23:38 Helpful (0)
Submit
Answers (2)

ridgeracer They are Samsung however they are only good for 5amps continuous...pretty much in line with their data sheet.

2020-03-07 01:22:32 Helpful (0)
Submit
Answers (1)

ridgeracer You can either use a FC and connect the servos to the pwm outputs or get an Ibus to pwm output converter. I don't recall if BG sells that.

2020-03-07 01:21:15 Helpful (0)
Submit
Answers (1)

Q: Banggood do you sell spare parts if I crash?

Asked by ridgeracer on 2020-02-16 10:53:53

ShihTzu hi,the spare parts will soon be available.

2020-03-04 03:13:15 Helpful (0)
Submit
Answers (1)

Q: Will this work with a micro fixed wing plane?

Asked by tremaynechettyandroi on 2020-02-28 12:07:09

ridgeracer You would need something to convert the Ibus signal back to separate PWM outputs and channels for the servos or use a flight controller with enough channels for your model.

2020-02-28 01:56:11 Helpful (0)
Submit
Answers (1)

BG174434019 stick with 3s ,I put 4s in mine and motor started stuttering after 4 min..dont think the esc is up for 4s

2020-02-23 02:53:43 Helpful (0)
Submit
Answers (2)

ridgeracer Are you sure the ground wire is connected also? Double check your wiring against the picture here and the manual.

2020-02-10 03:22:14 Helpful (0)
Submit
Answers (1)

Q: Any RSSI output?

Asked by lootshoot on 2019-11-10 02:39:20

ridgeracer Philip is right. I thought it would have telemetry. It doesn't and no Ibus.

2020-02-07 02:48:48 Helpful (1)
Submit
Answers (4)