All Messages

Q: what diameter are the conector pols to the motor? 3,5mm?

Asked by marwin on 2020-03-23 05:40:58

Sweetii The connector poles to the motor diameter is 4.0mm

2020-03-24 09:29:56 Helpful (0)
Submit
Answers (1)
marwin 2020-03-24 07:34:27
0
Recommendations
Comments (0)

Top reviewers you may like:

Q: can it fit in a Feiyue FY03?

Asked by derekkrause on 2019-12-28 06:32:52

marwin itfit in the feiyue fy08 very well. there is enough space.. i haveno4t3`T

2020-03-23 06:01:03 Helpful (0)
Submit
Answers (2)

Q: Hello I need New motor for FEIYUE fy06.... Which KV should I take?

Asked by Furlan Marko on 2018-01-23 02:01:49

marwin ichoosed the 5480KV for my feiyue fy08 and it runs much faster than bevore. But know after 2-3 times of running the ESC is blowing up.. so if you wanne use the original ESC the 3600KV is okay but maybe not that fast..

2020-03-23 05:58:34 Helpful (0)
Submit
Answers (1)

marwin Hi, I'm not a airplane guy but yes you can run the 5480KV motor version at 11 volt. The diameter of the shaft is 3,175mm

2020-01-30 05:58:49 Helpful (0)
Submit
Answers (1)

Q: hi will this motor work in 1/10 tamiya buggy? tt02b. thanks

Asked by Jord123 on 2020-01-19 12:26:53

marwin Hi! I don't know which ESC this buggy has. But currently if you chose the 5480KV version, it should be strong enough for 1:10 scale car.

2020-01-30 05:54:27 Helpful (0)
Submit
Answers (1)

Q: Can i run a 3s lipo on this?

Asked by BG454465527 on 2020-01-29 09:55:59

marwin Sure, you can run 3s and 2s lipo. You can read this in the discription I guess

2020-01-30 05:44:31 Helpful (0)
Submit
Answers (1)

marwin Hi, the part number for the rod is W12019. But I am not sure if it will fit at your fy03h because you need some kind of clamp to fix it on the chassis.

2020-01-12 03:33:09 Helpful (0)
Submit
Answers (1)

Q: will this fit in the a959 rc car ..thank you

Asked by RickyGarcia on 2018-01-28 06:50:05

thomas.krampf i´msorry, i have no experience with these car

2020-01-10 07:07:35 Helpful (0)
Submit
Answers (1)