Wszystkie wiadomości

Q: What is the function of pushbutton S1?

zapytał spaco na 2019-08-30 04:16:07

Roger The pushbutton is the main ON / OFF switch. It cuts the input (jack plug) from the 3 outputs.

2019-08-31 02:08:15 Pomocny (0)
Zatwierdź
odpowiedzi (1)

Q: Do you also have Cool White?

zapytał kam1787 na 2019-08-28 08:54:22

Roger https://www.banggood.com/High-Power-3W-LED-DIY-Light-Bead-Lamp-Chip-Blue-Red-Green-Warm-White-Yellow-p-1024180.html?rmmds=search

2019-08-30 01:56:28 Pomocny (0)
Zatwierdź
odpowiedzi (2)

Roger Youmay use to receivers of 4 channels with only one remote (if you paire them), but on each receiver the first channel will be ON when you push button 1 of the remote, and so on. It has not much sense.

2019-08-15 02:57:58 Pomocny (0)
Zatwierdź
odpowiedzi (1)

Q: Vt means what

zapytał kalaiselvanmani na 2019-08-14 01:32:53

Roger TheVT pin is the validation pin, to make sure the received signal is coming from the paired remote. You can just wire it to high.

2019-08-15 02:55:50 Pomocny (0)
Zatwierdź
odpowiedzi (1)

Q: The Whiter From the rgb is neutral/normal one?

zapytał gabriel_wender na 2019-08-13 10:49:18

Roger Youhave the choice between RGB, or Warm white, or neutral white (less yellowish than the warm white). This are 3 different strips.

2019-08-15 02:52:28 Pomocny (0)
Zatwierdź
odpowiedzi (1)

Roger That'snot normal. 3 possibilities : First, your module is effective. Second, you need to pair the remotes from new. Third, a neighbour is using something with same frequency (may baby survey tool)

2019-08-05 05:08:14 Pomocny (0)
Zatwierdź
odpowiedzi (2)

Q: Is it suitablefor windows7?

zapytał om meena na 2019-07-15 11:27:11

Roger Theoperating system doesn't influence.

2019-07-24 04:43:27 Pomocny (0)
Zatwierdź
odpowiedzi (1)

Roger onceyou don't use it in the way the manufacturer build it, it's at your own risks. You have to see how the segments are powered.

2019-07-24 04:42:29 Pomocny (0)
Zatwierdź
odpowiedzi (2)

Q: Will it work with 9v?

zapytał omerss na 2019-07-23 12:21:03

Roger Yes,but it will not be bright enough, because the small resistors are calculated for 12V

2019-07-24 04:39:49 Pomocny (0)
Zatwierdź
odpowiedzi (1)
Roger 2019-08-21 05:44:01
0
Zalecenia
Komentarze (0)

Najlepsi recenzenci, których możesz lubić:

Roger 2019-06-15 11:46:17
0
Zalecenia
Komentarze (0)

Najlepsi recenzenci, których możesz lubić: