4.71 av5
Skriva en recension
  • Alla recensioner(421)
  • Bilder
  • Videoklipp
  • All Star
    • All Star(421)
    • 5 Star(361)
    • 4 Star(30)
    • 3 Star(11)
    • 2 Star(8)
    • 1 Star(11)
Sortera efter:
Topp granskning
  • Topp granskning
  • Mest hjälpsam
  • Senaste
  • October-30 2020 11:27:22

    Ricevuto, è come aspettavo. Lo devo adattare a radiocomando che ho.

  • February-01 2020 15:19:23

    All good fits my Frsky Horus X12S

  • March-04 2020 02:12:42

    Schön beschrieben! Passt nur nicht! Ist nicht geignet für diese Steuerung wie beschrieben..

  • December-11 2019 10:40:34

    It is not specific to the FIMI A3 but is easily fitted with adhesive velcro. It works perfectly.

  • January-09 2020 04:43:26

    Πολύ καλή ποιότητα

  • April-28 2017 03:16:36

    The screen was as advised designed for a different device however with a small trim of the bits not required and some two sided sticky tape and a small amount of super glue it was fitted within 15 minutes. I note others commenting regarding difficulty or not made to fit but this is clear in the sale information, D.I.Y fitting adjustment. I would reccomend this to others who are capable of the fitting process.

  • October-03 2016 18:10:52

    I got different version than depicted in add. It is wider than space allocated on transmitter for about 6 mm and it it is taller for almost same amount. Can it be fixed to transmitter as it was intended without using hot glue and messing up your transmitter and making modification permanent? In short answer is YES Is it lot of work IT depends on version you get if you get one in picture then it is less work if you get one like mine than it is more work. It took me around 2 hours to fit it properly

  • June-21 2018 12:55:48

    Like others I hadn't noticed the part in the listing which specifies the need to adjust the part to fit the Hubsan controller. Not wanting to use glue or alter the part, I tried something and found a solution which others may find of interest. If your controller came with the Hubsan shade part (non-foldable), this part can be attached to the rectangular base of the Hubsan part, which then can attach to the controller. Please see the images to see what I mean. It's not completely secure, could be prone

  • January-19 2017 00:08:49

    Item fits the Remote well with minor modification. You need the cut the 3 plastic prongs that protrude out, then align it to the screen and hot glue it. Love it works freaking good. Pictures attached.

    kommentarer (1)
  • September-08 2016 17:08:57

    this porduct dont fix for this transmiter is to big and have Mount nuts in wrong place. hod is 7,5 mm to Long, look Picture. is 115,77 mm Long, and place in transmiter have only 108,28 mm


    Go to page


    Du kanske är intresserad av

    recommendation for you
    • US$2.12
    • US$7.46
    • US$5.18
    • US$10.99
    • US$7.78
    • US$5.18
    • US$2.17
    • US$73.99
    • US$5.99
    • US$3.99
    • US$7.69
    • US$8.14
    • US$23.78
    • US$28.99
    • US$22.99
    • US$7.99
    • US$39.99
    • US$8.99